Flat Copper Wire Inductor SQ15 SQ1010 SQ1012 SQ1212

Electrical parameters:

• Flat wire specifications: width 1.0-2.0mm, thickness 0.1-0.5mm

• Rated voltage(v): 85 to 265 AC, 50/60Hz

• Turns ratio: N1:N2=1:1

• Insulation Resistance: 100mΩ MIN at 500DC

• Test frequency response: 10kHz 100mV

• Operating temperature range: -40ºC to +150ºC

• Temperature rise: 50ºC MAX

• Used to absorb common mode interference signals of 9-30MHz

• Used to absorb common mode signals and differential mode signals in the 9-30MHz band

Characteristics

• Small size, large current passing, unit current density is more than 1.3 times of round copper wire;

• Low DC resistance, extremely small distributed capacitance, good heat dissipation;

• Closed magnetic circuit, small magnetic leakage, ideal EMI effect, good conduction and radiation effect, stable consistency;

• Adopt fully automatic machine to wind the wire, the wire is neatly arranged without crossing, and the production efficiency is high; the customer plug-in operation is simple and convenient, time-saving, good quality and high efficiency;

• High insulation strength can extend the life of the power supply.

Feature:

• Rated voltage: AC/DC250V

• Insulation withstand voltage: AC1.5KV 60sec

• Working temperature range: -25℃~+125℃

• Installation method: vertical, horizonta

• Dual-wire choke and high-current common mode choke coils
• EMI suppression common mode chokes
• Chokes designed using common mode choke coil structure to enable better noise suppression
• PFC correction choke
• Current-compensated ring core double chokes
• Double isolated chokes
• Current-compensated chokes
• Common mode line chokes for high-frequency data lines design
• Combination line filter chokes
• Power factor controller transformer
• Common mode EMI/RFI filter
• Each part of this series can be sold separately: UU9.8, UU10, UU16 and UT20